About product: Hydrocarbon resin binder-based, high-temperature, final coat of aluminum pigment. Meets the requirements of AZS 035-1998 standard.

Purpose: Used in all metal products and structures operating in variable temperature conditions, steam boilers, furnaces and heat pipes, poles, external surfaces of oil tankers and other metal surfaces.

Surface preparation: The surface to be painted must be thoroughly cleaned of any dirt, grease and paste. If large defects are found on the surface of the painted metal, the surface should be thoroughly cleaned again, primer and intermediate paints should be repainted. Can be applied with a brush or spray.

How to use: Mix well before application and stir every 5 minutes during application. The paint is ready to be applied. Application can be done with a brush or spray.

Note: Pay attention to use pure water, clean mixing vessel and tools.

Storage conditions and duration: Can be stored in an unopened container in the temperature range of 0°C -35°C for 1 year. Do not expose to direct sunlight.

Warnings: “Fortis Group” LLC is not responsible for any problems that may occur during use outside of these instructions.