About product: It is a perfect primer for interior and exterior surfaces, walls and ceilings with a special polymer, which increases the adhesion resistance and durability of cement and especially gypsum-based plaster to the surfaces. Meets the requirements of AZS 034-98 standard.

Intended use:

• On concrete ceilings

• Gypsum and cement-based plasters are used as a primer for bonding to smooth surfaces.

Surface preparation: Surfaces such as concrete and plaster must be finished and free of any debris. The surface should be completely cleaned of rust residue, if the surface is very dusty, it should be washed with water or a binder.

Preparation of the mixture: Add up to 1% of the weight of the product to the Hyper Contact product container.

Note: Pay attention to use pure water, clean mixing vessel and tools. 

Instructions for use of the mixture: It is applied with a roller after receiving a homogeneous solution. The thickness of the spread should be determined by the condition of the surface. The thickness of one layer of gypsum-based plaster applied over the Hyper Contact product should not exceed 10 mm.

Application: Applying with rulo after achieved homogen mixture. Application mixture depends on surface. In case of possibility of difficult adhesion enhance application thickness.

Note: Make sure that the water, utensils and tools used are clean.

Storage conditions and durations: Product in a dry and clean place,can be stored for 6 months by stacking a maximum of 10 pieces on wooden or similar pallets, provided they do not touch the floor.

Warnings: “Fortis Group” LLC is not responsible for any problems that may occur during use outside of these instructions.