About product: Cement-based intermediate filler for tiles, ceramics, marble and other facing tiles. Meets the requirements of AZS 039-2000 standard.

Purpose: The product is used to fill the gaps between ceramic and natural stone pans glued on vertical and horizontal surfaces.

Preparation of surface: Wait for the cladding to adhere firmly to the surface before use. Before use, the surface should be cleaned and wiped with a damp sponge. The surface must be dry and firm, free from dust, dirt, foreign bodies and all residues that prevent adhesion.

Preparation of the product: The water to be used is poured into a clean container and the product is slowly added and mixed at a speed of 400-600 rpm for 3-5 minutes until the balls are dissolved. After resting for about 3-5 minutes, mix again for 30 seconds to make the product ready for use.

Note: Make sure that the water, utensils and tools used are clean.

How to use mixture: The intermediate filler is filled between the pans with a rubber trowel in a cross motion. A rubber mallet should be used to properly position the facing materials. Fixation should be carried out within 10 minutes. The open working time is 20 minutes under normal conditions (temperature 20°C ± 2°C, humidity 65-70%).

Storage conditions and duration: Product in a dry and clean place, can be stored for 12 months by stacking a maximum of 10 pieces on wooden or similar pallets, provided they do not touch the floor.

Warnings: “Fortis Group” LLC is not responsible for any problems that may occur during use outside of these instructions.