About product: It is a high-quality primer based on gypsum and perlite, enriched with special additives. Meets the requirements of GOST 31-2000.

Purpose: Interior wall and it is used to prepare ceilings, plastered and primed surfaces for painting, wallpapering and decoration, as well as to fill the gaps on and between gypsum boards.

Surface preparation: The surface must be dry and firm, free from dust, dirt, foreign bodies and all residues that prevent adhesion. The surface should be washed with a binder or water 24 hours before to improve adhesion.

Preparation of the mixture: Pour 6-7 liters of water into a clean container, add 10 kg of product and wait for a few minutes, then mix mechanically or by hand until a homogeneous mass is formed. After waiting for 5-6 minutes, mix the solution again. Low speed should be used when mixing mechanically.

Note: Make sure that the water, utensils and tools used are clean.

How to use: The primer is applied to the surface with a trowel and smoothed.

Storage conditions and durations: Product in a dry and clean place, can be stored for 6 months by stacking a maximum of 10 pieces on wooden or similar pallets, provided they do not touch the floor.

Warnings: “Fortis Group” LLC is not responsible for any problems that may occur during use outside of these instructions.