About product: Gypsum and perlite based high quality plaster enriched by special mixtures. Comply with the requirements of AZS 046-2000 standards.

Intended uses: For leveling out internal walls built of brick or concrete and also concrete ceilings.

Surface preparation: The surface should be clean, and free from dust, dirt, loose particles and other foreign particles that prevent the proper adhesion of the plaster. In order to improve adhesiveness wash the surfaces with binder or water before 24 hours application. In order to increase adhesiveness at the smooth concrete surfaces must apply “Giper Kontakt” or relevant product.

Preparation of the mixture: Pour 5-6 lt of water into a clean mixing vessel, add 10 kg of the primer slowly, wait for several minutes, and mix manually or using a proper mechanical mixer until a lumpfree homogeneous mixture is achieved. Mix again after 5-6 minutes.

Note: Pay attention to use pure water, clean mixing vessel and tools.

Application of the mixture: The mixture is applied onto the surface and smoothed using a spatula.

Shelf life and storage conditions: The product must be save at dry and clean place, on wooden racks, maximum 10 bags per rack placed one over, another provided not contact with the floor.

Warnings: “Fortis Group” LLC is not responsible for any problems occurred due to improper use of the product.